Sinpo Medical 锐盛医疗科技

Best Quality And Service for Hospital Around the World
Product Detail


●Servo Control Mode: air temperature;

● Parameter Displaying: set temperature,air temperature, heat power rate;

● Audible & Visual Alarms: powerfailure, sensor failure, higher & lower temp, air temperature override,fan failure, system failure;

● >37℃Preset Mode: power failure reset memory, alarm silence, keypad lock, self-testfunction;

● Hood with dual slope; 6 hand-ports;

● RS-232 Output Connector (use for networksystem);

●IV poles;

●Protective guard rail;

●Storage cabinets.

Specifications of hood

Mattress to Hood: 450 mm

Observation side of hood: Two incline

Operate port: 6 (2 Iris ports)

Tubing grommets: 4

Front access panel: 826×310 mm

Mattress Tray Size: 630×360 mm

Technical Specifications:    

Power requirement ≤400VA

Temperature control mode: Air servo control

AirTemp Control Range: 20℃~37℃

Temperature override mode to: 20℃~39℃

Temperature fluctuation: ≤0.5℃

Mattress temperature uniformity: ≤0.8℃

Temperature rise time: ≤45 min

Noise level within hood environment: ≤55dB


Power failure alarm        

Fan failure alarm

Sensor failure alarm

High air temperature alarm: +3.0℃

Low air temperature alarm: -3.0℃

Over air temperature alarm: ≤38.0℃; ≤40.0℃

System failure alarm  

Alarm silence function

Operational condition  

Environment temperature: +20℃~+30℃

Environment relative humidity: 5%~99%

Environment air velocity of flow: <0.3m/s


Infant bed tilt adjusting  ±10° step-less

Mattress tray Max. load  10kg

Transfusion pole Max. load   2kg

Cabinet Max. load  6kg
24Hour Hotline
0086 571 8275 3109
0086 576 8990 3136
NO.108,Shixin North RD,Economic And Technological Development Zone, Xiaoshan District,Hangzhou City,Zhejiang Province-311215
website qrcode

Scan it

Concept Tower,Room No.4D,3rd Floor,68-69 Green RD,Dhanmondi,Dhaka-1205
leave a message
back to the top